1000+ Gallon Display Plywood / Fiberglass Build

Can you help or guide us in creating something of our own? Or do you need help building "IT", this is the forum for that

Re: 1000+ Gallon Display Plywood / Fiberglass Build

Postby MattShack » Fri Dec 18, 2009 5:12 pm

While waiting on the drill battery to charge. I decided to insulate the tank. I used the 1/2" styrofoam that the glass came packaged in. Thought I would put it to good use.

Image
Matt S
User avatar
MattShack
Remora
Remora
 
Posts: 160
Joined: Wed Dec 31, 1969 7:00 pm
Location: Ridgeland, MS

Re: 1000+ Gallon Display Plywood / Fiberglass Build

Postby MattShack » Sun Dec 20, 2009 3:51 pm

This weekend's projects:

This is going to be the sump. The plywood is sticking up above the frame so when I put the liner in, I can wrap it over the plywood and then I will put the rest of the framing on top. This will sandwich the pond liner between the boards, hopefully keeping it in place.

Image

Image

Image
Matt S
User avatar
MattShack
Remora
Remora
 
Posts: 160
Joined: Wed Dec 31, 1969 7:00 pm
Location: Ridgeland, MS

Re: 1000+ Gallon Display Plywood / Fiberglass Build

Postby MattShack » Sun Dec 20, 2009 3:58 pm

The tank room:

The room is "L" shaped. It is 5' x 11' where the tank sits and I have 7' x 11' area on the side of the tank.

Framing

Image

Drywall

Image

Inside (Standing at door)

Image

Inside (Standing by tank facing door. The door is to the left just out of the pic.)

Image

As you can see I still have to do the entire inside of the tank room. But, I have to finish the outside first (My wife is "tired of my mess" :lol: )
Matt S
User avatar
MattShack
Remora
Remora
 
Posts: 160
Joined: Wed Dec 31, 1969 7:00 pm
Location: Ridgeland, MS

Re: 1000+ Gallon Display Plywood / Fiberglass Build

Postby MattShack » Wed Dec 23, 2009 6:19 pm

pH update:

The pH has been holding at below 7 for the last 4 days. I test everyday and haven't noticed any change in 2 days. Finally starting to look good. Not too bad for almost 2000 lbs of concrete.
Matt S
User avatar
MattShack
Remora
Remora
 
Posts: 160
Joined: Wed Dec 31, 1969 7:00 pm
Location: Ridgeland, MS

Re: 1000+ Gallon Display Plywood / Fiberglass Build

Postby MattShack » Sat Dec 26, 2009 3:24 pm

It has been 1 week now since I've added anything to the tank to adjust the pH. It is still unchanged and holding below 7.
Matt S
User avatar
MattShack
Remora
Remora
 
Posts: 160
Joined: Wed Dec 31, 1969 7:00 pm
Location: Ridgeland, MS

Re: 1000+ Gallon Display Plywood / Fiberglass Build

Postby DOCTOR » Thu Jan 28, 2010 9:48 am

UPDATE?


Cant just get us hooked and then pull the plug
User avatar
DOCTOR
Site Admin
Site Admin
 
Posts: 1224
Joined: Wed Dec 31, 1969 7:00 pm
Location: Mountain Home, AR

Re: 1000+ Gallon Display Plywood / Fiberglass Build

Postby redtop03 » Mon Jul 19, 2010 12:08 pm

Matt has been battling cancer,he hurt his shoulder working on the tank,he went to the Dr.for x-rays and they found a tumor in his chest,the chemo has him down and not much able to work on the tank but the tank literally saved his life,the tumor was putting pressure on the blood vessel that goes to his brain and almost stopped the blood flow,he was days from death.....

I called him yesterday,he's still weak from the chemo but sounded good,they have the tumor shrunk down and are getting ready to do the surgery to remove it,he should be back up and running a few months after the surgery....he's anxious to get started back on his tank and back to posting updates...

everybody keep him in your prayers,for a successful surgery and a speedy recovery
User avatar
redtop03
Goldfish
Goldfish
 
Posts: 8
Joined: Wed Dec 31, 1969 7:00 pm
Location: Barbourville,Ky.

Re: 1000+ Gallon Display Plywood / Fiberglass Build

Postby redtop03 » Mon Jul 19, 2010 12:15 pm

almost forgot.....the tank is still doing great,it's full of freshwater and everything is looking good,Matt just isn't able to do anything much to it right now...God willing,we'll be able to see some updated pics in a few months though
User avatar
redtop03
Goldfish
Goldfish
 
Posts: 8
Joined: Wed Dec 31, 1969 7:00 pm
Location: Barbourville,Ky.

Re: 1000+ Gallon Display Plywood / Fiberglass Build

Postby cartec » Tue Jul 20, 2010 9:44 am

we'll keep him in our thoughts n prayers thanks for letting us know ben
User avatar
cartec
Great White
Great White
 
Posts: 423
Joined: Wed Dec 31, 1969 7:00 pm
Location: flippin

Re: 1000+ Gallon Display Plywood / Fiberglass Build

Postby Reefer8 » Tue Jul 20, 2010 1:15 pm

Our family will be praying also....hate it for him but sounds like this was the best thing that could have happened to him!! Best of luck in recovery!!
Reefer8
If at first you don't succeed.....dig in the trash for the instructions!!
User avatar
Reefer8
Great White
Great White
 
Posts: 349
Joined: Wed Dec 31, 1969 7:00 pm
Location: Gassville

Previous

Return to DIY

Who is online

Users browsing this forum: No registered users and 1 guest

cron